|
 |
| ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) |
| Gross Power (SAE J1995) |
99 HP/2,000 RPM (74 kW/2,000RPM) |
| Net Power ISO 9249 |
95HP/2,000 RPM (71 kW/2,000RPM) |
| Make/Model |
DeutzTCD36diesel engine |
| Type |
4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler |
| Number of cylinders |
4 |
| Bore and stroke |
3.858″ x 4.724″ (98mm x 120mm) |
| Total displacement |
220.9in3(3.62 liters) |
| Alternator |
AC 24V – 1.92 kW (80 amp) |
| Air Cleaner |
Dry type (double element) |
| Starter Motor |
DC 24V –4.0 kW (5.4 HP) |
| Battery |
12V – 52AH (450 CCA), 2 units |
|
|
| TRANSMISSION |
| Type |
Electrically controlled1 motor hydrostatic transmission with gear box |
| Pump |
Variable-displacement, load-sensing, bi-directional, axial-piston type |
| Motors |
Variable-displacement, bent-axis, axial-piston type |
| Top Speed : Forward (2 speeds) |
2nd: 21.4 MPH (34.5 km/hr) |
| Speed : Reverse (2 speeds) |
2nd: 21.4 MPH (34.5 km/hr) |
|
|
|
| SYSTEMS REFILL CAPACITY |
| LOCATION |
GALLONS |
LITERS |
| Fuel tank (diesel fuel) |
27.7 |
150 |
| Engine lubricant (including oil pan) |
2.9 |
11 |
| Engine coolant |
4.2 |
16 |
| T/M gear box |
2.1 |
8 |
| Axle (front/rear) |
3.7/3.7 |
14/14 |
| Hydraulic oil tank |
13.2 |
50 |
| Hydraulic system (including hydraulic tank) |
21.1 |
80 |
|
|
| HYDRAULIC AND STEERING SYSTEM |
| Steering type |
Articulated frame steering |
| Steering mechanism |
Hydraulic power steering unit,direct operated type |
| Lift (boom) cylinder |
Two (2) double-acting piston type: 4.134″ x 27.953″ (105mm x 710mm) |
| Tilt (bucket) cylinder |
One (1) double-acting piston type: 4.921″ x 17.520″ (125mm x 445mm) |
| Steering cylinder |
Two (2) double-acting piston type: 2.362″ x 15.551″ (60mm x 395mm) |
| Main oil pump |
Gear type:32.2 GPM/2988 PSI @ 2000 RPM (122 LPM/20.6 MPa @ 2000 RPM) |
| Pilot oil pump |
Gear type:5.8 GPM/1494 PSI @ 2000 RPM (22 LPM/10.3 MPa @ 2000 RPM) |
| Relief valve set pressure |
Loading |
2,988psi, 20.6 MPa (210 kg/cm2) |
| Steering |
2,495psi,17.2 MPa (175 kg/cm2) |
| HYDRAULIC CYCLE TIME* front end loading, Z bar linkage system |
| Lifting time (at full load) |
6.6 sec. |
| Lowering time (empty) |
2.7 sec. |
| Bucket dumping time |
1.5 sec. |
| TOTAL |
10.8 sec. |
| * Measured in accordance with SAE J732C |
|
|
| AXLE SYSTEM |
| Drive system |
4-wheel drive |
| Front and rear axle |
Semi-floating type |
| Tires |
20.5-25-12PR(L-2) |
| 17.5-25-12PR(L-2) (L-3) |
| Reduction and differential gear |
Spiral bevelgear, torque proportioning, single stage reduction |
| Final reduction gear |
Inboard mounted, internal planetary gear |
| Oscillation angle |
±10° |
|
|
| BRAKE SYSTEM |
| Service brakes |
4 wheel, wet multiple disc brake. Controlled by hydraulic brake booster. Dual circuit. |
| Parking/Emergency brake |
Spring-applied, oil pressure-released. Located on transmission. |
