new-holland-primary-logo- NEW
Call Us
95Z7 T4F Image

95Z7 T4F

Call for Pricing

Price

Make:
360 Yield Center
Model:
95Z7 T4F
Category:
Hitachi Loaders, New, Wheel Loaders

ENGINE
(EPA Tier 4 Final/EU Stage IV Certified)
Net Power (SAE J1349) ISO 9249 386HP/1,800 RPM (288 kW/1,800 RPM)
Make/Model Isuzu 6WG1 diesel engine
Type 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler
Number of cylinders 6
Bore and stroke 5.787″ x 6.063″ (147mm x 154mm)
Total displacement 957 in3(15.68 liters)
Alternator AC 24V – 2.64 kW (110A)
Air Cleaner Dry type (double element)
Starter Motor DC 24V – 7.0 kW (9.4 HP)
Battery 12V – 200AH (1,300 CCA), 2 units
TORQUE CONVERTER AND TRANSMISSION
Torque converter 3 element, single-stage, 1-phase w/lock-up clutch
Transmission Planetary gear type, Full power shift, Autobrake protects transmission from overspeeding
Normal Mode Power Mode
Top Speed : Forward (4 speeds) 4th: 23.0 MPH (37.0 km/hr)* 4th: 23.0 MPH (37.0 km/hr)*
Speed : Reverse (3 speeds) 3rd: 14.5 MPH (23.4 km/hr)* 3rd: 14.5 MPH (23.4 km/hr)*
* Indicates speed in lock-up
SYSTEMS REFILL CAPACITY
LOCATION GALLONS LITERS
Fuel tank (diesel fuel) 115.7 438
Engine lubricant (including oil pan) 13.7 52
Engine coolant 18.2 69
T/M & T/C 18.8 71
Axle (front/rear) 25.1/25.1 95/95
Hydraulic oil tank 47.0 178
Hydraulic system (including hydraulic tank) 77.9 295
DEF/AdBlue® tank 15.1 57
HYDRAULIC AND STEERING SYSTEM
Steering type Articulated frame steering
Steering mechanism Hydraulic power steering unit, pilot operated type
Lift (boom) cylinder Two (2) double-acting piston type: 6.229″ x 40.433″ (160mm x 1,027mm)
Tilt (bucket) cylinder Two (2) double-acting piston type: 5.118″ x 25.827″ (130mm x 656mm)
Steering cylinder Two (2) double-acting piston type: 3.543″ x 23.662″ (90mm x 600mm)
Main oil pump Variable piston type: 89.8 GPM/1000 PSI @ 1,800 RPM (340 LPM/6.9MPa @ 1,800 RPM)
Pilot oil pump Gear type: 23.8 GPM/3,260 PSI @ 1,800 RPM (90 LPM/22.5 MPa @ 1,800 RPM)
Relief valve set pressure Loading 4,554 psi, 31.4 MPa (320 kgf/cm2)
Steering 3,988 psi, 27.5 MPa (280 kgf/cm2)
HYDRAULIC CYCLE TIME* front end loading, Z bar linkage system
Lifting time (at full load) 5.8 sec.
Lowering time (empty) 4.4 sec.
Bucket dumping time 1.4 sec.
TOTAL 11.6 sec.
* Measured in accordance with SAE J732C
AXLE SYSTEM
Drive system 4-wheel drive
Front and rear axle Semi-floating type
Tires 29.5R25(L-3)(L-4) (L-5)
29.5-25-28PR (L-3) (L-5)
875/65R29 (L-3) (L-4)
Reduction and differential gear Spiral bevel gear, torque proportioning, single stage reduction
Final reduction gear Outboard mounted, internal planetary gear
Oscillation angle ±12°
BRAKE SYSTEM
Service brakes 4 wheel, wet multiple disc brake. Controlled by full hydraulic system. Dual circuit.
Parking/Emergency brake Spring-applied, oil pressure-released. Located on driveline.

Similar Products

EX2600-7 Image

EX2600-7

Call for Pricing
Net Power 1119 kW 1,500 hp Operating Weight Backhoe 257...
ZX160LC-6 Image

ZX160LC-6

Call for Pricing
Net Power 86 kW 116 hp Operating Weight 17 717 kg 39,024 lb....
95Z7 Image

95Z7

Call for Pricing
ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) G...
85Z7 T4F Image

85Z7 T4F

Call for Pricing
ENGINE(EPA Tier 4 Final/EU Stage IV Certified) Net P...
67TM7 Image

67TM7

Call for Pricing
ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) Gross Power (S...
ZX245USLC-6 Image

ZX245USLC-6

Call for Pricing
Net Power 119 kW (159 hp) Operating Weight 25 800 kg (56,830...
95Z7 XT Image

95Z7 XT

Call for Pricing
ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) G...
62Z7 Image

62Z7

Call for Pricing
ENGINE(EPA Tier 4 Interim/EU Stage IIIB certified) Gros...